I can't seem to get the page with the classifications for each class to load.
Classifications are meant to place as many comparable vehicles into the same class. We wanted to avoid placing a vehicle into a class that would either have an unfair advantage or have an extreme advantage in the class. The overall philosophy was to keep the vehicles as closely matched as possible where the driver’s skill and experience would be the major factor.
5. Classifications
A. Stock
1. Vehicle must meet manufactures stock specifications, minor alterations allowed.
2. Tire size not to exceed 32 inches in height.
3. Maximum combined lift is not too exceed 2.5 inches.
4. No engine enhancing components/aftermarket add on components, such as but not limited to;
a. Products that enhance/boost horsepower.
b. Engine/transmission swaps.
5. Open or limited slip axels.
6. For those vehicles that come from the factory with a locking differential installed
a. These vehicles will be placed in the next higher classification.
B. Super Stock
1. Vehicle must meet manufactures stock specifications, minor to medium alterations will be allowed.
2. Tire size not to exceed 34 inches
3. Maximum combined body and suspension lift not to exceed 4.5 inches.
4. Minor Engine and/or drive train modifications.
a. No engine and/or transmission swaps
5. Axel gearing or larger axels allowed.
6. Locking differential/Limited Slip options:
a. One (1) locking differential.
b. One (1) Locking Differential with one (1) Limited Slip.
c. Two (2) Limited Slip Differentials.
C. Pro Stock
1. Vehicle must meet manufactures stock specifications, with medium to major alterations allowed.
2. Tire size not too exceed 36 inches
3. Maximum combined body and suspension lift not to exceed 6.5 inches
4. Engine and/or drive train modifications.
a. Engine and/or transmission swaps allowed.
5. Axel gearing or larger axels allowed.
6. Locking Differential/Limited Slips, any combination allowed.
D. Open Class
1. Vehicle must meet manufactures stock specifications, major alterations allowed.
2. Tire size-open
3. Maximum lift-Open
4. Engine and/or transmission modifications-Open
5. Axel and gearing-Open
6. Locking Differentials-Open
E. The event technical inspector will have final say for classifications.